Product Pictures:
Technical Parameter of Table type cnc plasma cutting machine Specification for cutting plates3000脳1500mm Cutting pipe diameter蠁30-蠁800mm Longitudinal moving speed10000mm/min cutting speed60-2000mm/min plasma cutting thickness0-25mm(Optional) Air pressure (plasma)0.8Mpa Maximum stroke of cutting torch lifting.0-400mm(Optional) Maximum weight of pipe鈮?000kg(Optional) Cutting steel pipe transmission form.Chuck Cutting accuracy卤0.5mm Cutting modePlasma Raising modeArc pressure adjustment How to improve the precision and speed of plasma cutting? Operation precautions 1. Before operation, the operator must wear insulating shoes, insulating gloves and protective glasses. The equipment must be reliably grounded. 2. The plasma cutting power supply must have enough high no-load voltage to be easy to start arc and make the plasma arc burn stably. The no-load voltage is generally 120-600v, while the arc column voltage is generally half of the no-load voltage. By increasing the arc column voltage, the power of plasma arc can be increased obviously, so the cutting speed and thickness of metal plate can be increased. The arc column voltage is often not reached by adjusting the gas flow and increasing the internal shrinkage of the electrode, but the arc column voltage cannot exceed 65% of the no-load voltage, otherwise the plasma arc will be unstable. 3. Cutting current 4. Increasing the cutting current can also improve the power of plasma arc, but it is limited by the maximum allowable current. Otherwise, the plasma arc column will become thicker, the slit width will increase, and the electrode life will decrease. Application:Heavy Duty Industrial Plasma Cutting Machine suppliers website:http://www.hongniumachinery.com/plasma-cutting-machine/heavy-duty-industrial-plasma-cutting-machine/ |