Outer spherical bearing The Outer spherical bearing is a variant of the deep groove ball bearing, which is characterized in that its outer ring outer diameter surface is spherical, which can be fitted into the corresponding concave spherical surface of the bearing seat to play a self-aligning role. It is preferably applied to the occasions where the equipment and parts are simple, such as agricultural machinery, transportation system or construction machinery. Installation 1. Before installing the bearing on the shaft, you must first remove the fixing pin of the bearing jacket, at the same time polish the surface of the journal smooth and clean, and apply oil to the journal to prevent rust and lubrication (allowing the bearing to rotate slightly on the shaft). 2.Apply lubricating oil to the mating surfaces of the bearing housing and bearing, and install the bearing into the bearing housing. Then put the assembled bearing on the shaft together with the bearing seat. Push to the desired location to install. 3. Do not tighten the bolts that secure the bearing housing first, but allow the bearing housing to rotate in the bearing housing. Also install the other end bearing and seat on the same shaft, rotate the shaft a few times, and let the bearing itself find the correct position automatically. Then tighten the bearing seat bolts.Composite Bearing factory website:http://www.yongqiangbearing.com/composite-bearing/ |